INNOVATION AUTOMATIC CO.,LTD
FOCUS ON PRODUCTION OF AUTOMATIC WEIGHING SYSTEM!
Add to Cart
Friction Material Automatic Batching System For 9 Kinds Of Materials
Production introduction:
Before starting the system, you must first set the ingredient formula ratio and store it in the system. According to the actual production process, set the given quantity and advance quantity to ensure that the weighing is accurate.
The mobile mixer must move to the designated discharge port and fix the dust-proof interface, select the product name to be produced, start the system, and the system will automatically batch according to the process set by the program, carry out the fast feeding state in the previous stage, and reach the setting After measuring, feed at low speed automatically to ensure high feeding accuracy until the batching is completed.
The powder material is added to the stirring device during the actual batching to prevent blockage and intermittent turbulence, resulting in measurement errors. If the 6-9 volume material is not enough in the measurement process, the system will automatically drive the powder at the bottom of the 1000 hopper The butterfly replenishment and the replenishment amount meet the batching cycle.
When the proportion of all materials is completed, the system drives the red indicator light to indicate that the batching is completed, but when the green indicator light is working, it means that the system is batching. At this time, the raw material warehouse is not allowed to perform manual feeding operations!
After each batching cycle, If you need to re-proportioning, the system must detect that the mobile mixer is in place, and then you can perform the proportioning work to prevent human error from spilling. 9 kinds of materials are automatically identified whether there are raw materials in the storage bin and whether the raw materials can complete a proportioning cycle.
If there is a shortage of materials, the system will automatically display the lack of material bin status and flash a prompt to feed. The entire system is based on Modbasj communication bus control. Once each execution unit fails, the faulty unit will be automatically identified, and the execution unit can be changed as needed, so as to ensure long-term reliable and stable production without failure of individual execution units.
